Direct-From-Factory Fenestration Systems
Explore our top-tier architectural series precision-extruded from primary 6063-T6 aluminum alloys. Every configuration complies with rigorous CE, AS 2047, and international energy codes.
CE Certified
Acoustic Rated
Passive House
Smart Motorized
Crittall Sightline
Grand Entrance
Heavy Traffic
Patio & Balcony
Why Global Specifiers Partner with DERCHI
As a distinguished leader among Foshan's premier fenestration manufacturers, Guangdong Dejiyoupin Doors and Windows Co., Ltd. (DERCHI) bridges cutting-edge industrial capability with bespoke architectural expression. Our precision-engineered aluminium Crittall-style systems redefine how commercial developments, heritage restorations, and high-end residences achieve historic industrial aesthetics without sacrificing contemporary thermal efficiency.
- Full Regulatory Compliance: Audited manufacturing lines conforming to European CE Standards (EN 14351-1), AS 2047 cyclonic testing, ISO 9001, and North American NFRC performance benchmarks.
- Complete End-to-End Vertical Control: In-house extrusion fabrication, automated CNC milling, thermal barrier crimping, and proprietary fluorocarbon coating facilities guarantee millimeter tolerance.
- Seamless Logistics Support: Specialized timber export crating, direct container loading (FCL/LCL), and dedicated project engineers working alongside European, Oceanian, and American time zones.
Aluminium vs. Traditional Hot-Rolled Steel Crittall Systems
While traditional mild steel established the iconic 19th-century industrial look, contemporary building regulations demand superior insulation, zero structural corrosion, and reduced dead load. Review the performance benchmarks below.
| Performance Metrics | Architectural Thermal Break Aluminium (DERCHI) | Traditional Hot-Rolled Steel | Standard Non-Thermal Aluminium |
|---|---|---|---|
| Thermal Transmittance (U-Value) | 1.1 – 1.6 W/m²K (Polyamide PA66 Inserts) | 2.8 – 4.2 W/m²K (Severe Heat Bridging) | 3.6 – 5.8 W/m²K (Uninsulated) |
| Corrosion Resistance / Marine Grade | Immune to rust; Qualicoat Class 2 / PVDF >30 yrs | Requires regular repainting; prone to internal rust | Moderate; dependent on surface treatment |
| Sightline Profile Width | 30mm – 38mm ultra-slim sightlines | 25mm – 32mm traditional sightlines | 45mm – 65mm bulky extrusion |
| Structural Weight Load on Lintels | Lightweight (~2.7 g/cm³); minimal structural load | Heavy (~7.8 g/cm³); requires reinforced headers | Lightweight (~2.7 g/cm³) |
| Glazing Thickness Capacity | Up to 36mm Triple Glazing / Argon / Low-E | Limited to Single or Slimline 16mm Double | Up to 24mm Double Glazing |
| CE EN 14351-1 Water & Air Tightness | Class 4 Air / Class 9A Water Penetration | Class 2 Air / Class 4A Water Penetration | Class 3 Air / Class 6A Water Penetration |
Strategic Sourcing Trends in Architectural Fenestration
International developers and architectural specifiers are navigating stricter compliance mandates and shifting aesthetic paradigms. Sourcing teams must prioritize these evolving criteria over the next decade.
Commercial developments across Europe and Oceania now audit the lifecycle impact of building envelopes. Sourcing low-carbon, recycled billet aluminum (hydro-powered smelting) dramatically offsets scope 3 carbon declarations while maintaining metallurgical ductility.
Rather than surface-applied cosmetic tape that peels over thermal cycling, tier-1 architects demand authentic structural glazing bars and magnetically interlocked interior grids with concealed hardware, ensuring timeless Bauhaus and industrial authenticity.
Rising jobsite labor costs in destination ports have triggered an accelerated transition toward pre-glazed, factory-assembled sub-frames with pre-punched structural anchor brackets, cutting onsite installation timelines by over 40%.
Technological Advancements in Crittall Systems
Next-generation engineering focuses on achieving microscopic profile depths while accommodating high-mass acoustic glass assemblies and dynamic climate control.
VIG integration enables center-of-glass U-values as low as 0.60 W/m²K within an ultra-thin 8.3mm profile, eliminating the bulky triple-pane units that traditionally compromise slimline Crittall profiles.
Micro-robotic European multi-point locking drives embedded invisibly inside the sash chambers interface with Building Management Systems (BMS), weather sensors, and mobile access credentials.
Utilizing patented silica aerogel inside the polyamide extrusion chambers provides unmatched thermal resistance without adding dead-weight, completely preventing cold-climate condensation bridging.
Frequently Asked Questions for Project Specifiers
Clear, direct technical answers regarding structural engineering, testing reports, marine finishes, and commercial volume procurement.
All DERCHI window and door assemblies include comprehensive factory production control (FPC) records and third-party laboratory test reports verified under EN 14351-1. Documentation verifies air permeability (EN 12207), water tightness (EN 12208), wind load resistance (EN 12210), and acoustic insulation performance (EN ISO 717-1), providing turn-key submission compliance for municipal certifiers.
We utilize high-precision polymide insulating struts (PA66 GF25) mechanically rolled between precision-milled interior and exterior 6063-T6 aluminum extrusions. This achieves complete thermal decoupling. When paired with warm-edge spacer bars and double or triple argon-injected Low-E glass, our systems achieve overall system U-values down to 1.2 W/m²K while preserving the coveted 32mm profile face.
Yes. Standard commercial powder coating is inadequate for coastal developments within 5km of the ocean. For marine deployments, we specify Qualicoat Seaside-grade pretreatment or 3-coat/70% Kynar 500 PVDF fluorocarbon coatings rated to withstand over 3,000 hours of continuous ASTM B117 salt spray exposure without blistering or chalking.
Custom fabrication timelines run 25–35 days following signed approval of CAD shop drawings and finish sign-off. Finished units are secured with protective PE film, corner protectors, and sealed inside fumigated IPPC-certified solid plywood crates. We manage consolidated FCL ocean freight direct to major ports across the Americas, Europe, Australia, and New Zealand.
Our in-house facade engineering department supplies free parametric BIM models (Revit), full CAD elevation shop drawings, wind-load deflection calculations, and structural connection details mapped directly to your project schedule before any aluminum is cut, eliminating dimensional errors and project delays.
Connect Directly with Factory Structural Engineers
Receive instant engineering reviews, project-specific CAD shop drawings, and competitive commercial factory direct pricing for your development.
Contact Us